1
2
3

Metal carved insulation board with glue precautions


Release time:

2019-11-18

In the architectural decoration, the metal carved insulation board can be widely used, mainly because its pattern is exquisite, and the texture is thin and light, and the glue is used to fix it. We should pay attention to the following points.

In the architectural decoration , the metal carved insulation board can be widely used, mainly because its pattern is exquisite, and the texture is thin and light, and the glue is used to fix it. We should pay attention to the following points .

1. The composite surface of the metal carved insulation board must be flat to improve the composite bonding strength and reduce the amount of glue used.
2, the adjustment ratio must be accurate, the glue must be stirred evenly .
3. In order to ensure the pressure of the composite quality , there must be a certain outflow of glue .
4. Do not move the metal carved insulation board before the glue is cured .
5, the glue must be used now , after the glue must be used up within the available time.
6, the construction temperature can not be lower than 5 ° C, the humidity is less than 70% .
7. Do not mix large appliances with different components of glue, and put the remaining glue after mixing back into the package.
The architectural decoration can not be used in combination with a variety of metal carved insulation boards, and it is fixed by glue. Note that the glue is evenly distributed so as to fix it for a long time .

 

Metal carved insulation board with glue precautions

Jinan,Dibaier,Environmental,Protection,Materials,Co.,,Ltd.